Operate two lights from the same switch up to a distance of 20m, with this remote control operated designer switch.
- Dimensions: 86mm x 86mm x 33mm
- Operating voltage: AC110V-240V/50Hz~60Hz.
- Rated load: each way≦300W
- Self consuming power: Less than 1mA
- Operating environment:-20~45℃,Less than 95%RH
- Life span:＞100,000 times
- Distance: 20m
- Frequency: 315/433MHz
- A 35mm back box is required for this switch (not supplied).
- IP Rating: IP20
- Warranty: 3 Years
- Please note: This switch is not a dimmer switch.
Customer Reviews (1)
- very suitable for controlling light
just what needed to finish off the lighting controls in my new kitchen, however instruction booklet only showed in very small writing that a battery was required to operate the control box
- Delivery & Returns
Shipping is £2.99 and Free Over £60, Next Day Option Available
Order before 5pm and we’ll despatch your items the same working day. Please allow 3 – 5 working days for standard delivery, next day options are also available from £3.99 (£1.99 over £60).
Additional charges may be applicable to Highlands, Lowlands & Islands. This includes the following post code groups: AB, KW, PA, PH, IV, IM, ZE, HS, JE, GY, BT.
Here at BeamLED.com we operate a 30 days return policy, so if you are not completely satisfied with your purchase(s) you'll be able to return it within 30 days of its delivery.
If you are unhappy with your purchase, simply get in touch to arrange a refund or exchange. The item(s) need to be in their original condition & packaging and you will need to bear any postage fees unless faulty.
To speak with a member of our customer services team call 0344 417 2564 (dial +44 344 417 2564 for calls made from outside the UK).
Our hotline is open Monday - Thursday 8.30am - 10pm and Friday and Saturday 8.30am - 5pm. Please note, lines are closed on Sunday.
- Data Sheets / Manuals
- Full Description
This two gang light switch is a stylish alternative to standard switches and offers the double convenience of remote control operation and operating two lights from the same switch.
It has a crystal tempered glass front with LED indicator for an attractive look and to help you find the switch in the dark. The switch can be operated from anywhere up to a distance of 20m.
To retain its looks, the front glass panel is resistant to scratches and humidity. There is also no risk of sparking when the lights are turned on, either by the remote or by hand as the switch works using E-start and installation is easy with the single live wire control.
This switch is easy to install and will directly replace old switches. It can be used in the home and office, with all kinds of bulbs.
A 35mm back box is required for this switch (not supplied).
Please note: The battery type for the remote is 12V, 23AE (not supplied).
Please note: this switch is a one way switch.